SPC Flooring

Goes where wood can't

Stone Polymer Composite is the next generation of vinyl flooring. Around three quarters of the core is mineral, which is what gives it the density to shrug off dents, spills and direct sunlight.

100% waterproof

Click system, no adhesive

Underfloor heating compatible

Up to 21dB quieter underfoot

What is SPC

The floor that behaves itself.

SPC stands for Stone Polymer Composite. A mineral rich core, only around a quarter PVC. That density is what changes everything.

It won’t swell when water sits on it. It won’t dent when a chair leg drags across it. And it won’t expand and lift when the afternoon sun hits it, so it can run right up to patio doors and under large windows.

If you want the look of wood or stone somewhere that wood or stone would struggle, this is the answer.

75%

Mineral Core

21DB

Noise reduction

100%

Waterproof

0

Adhesive required

Anatomy

Five layers. One floor.

Layer build-up, top to bottom
spc-anatomy 2
01

UV protective varnish

Filters ultraviolet light so the design does not fade.

02

Wear layer

Protects the finish from the abrasion of everyday foot traffic.

03

Decorative layer

Digitally printed wood and stone finishes with realistic depth and grain.

04

Rigid SPC core

High density mineral core. This is where the stability and impact resistance come from.

05

IXPE acoustic backing

Built in sound absorption. No separate underlay needed.

Why SPC

Six reasons people choose it.

Genuinely waterproof

Bathrooms, kitchens, utilities and wet rooms. Spills, splashes and mopping are not a problem.

Built for busy floors

The density of the core resists dents, scratches and impact better than traditional vinyl or laminate.

Stays where you put it

No expansion gaps creeping open when the temperature swings. Safe next to glass and in conservatories.

Quieter to walk on

The acoustic layer softens footfall, which matters in flats, upstairs rooms and open plan spaces.

Quick to fit

Click system, floating installation. Most rooms go down in a day with no adhesive and no mess.

Almost no upkeep

Sweep it. Mop it. That is it. No sealing, no sanding, no refinishing.

spc-banner-smaller

How SPC compares

Set against the alternatives.

SPC Laminate Standard LVT Engineered Wood
Waterproof Yes No Water resistant No
Bathrooms and wet rooms Yes No Sometimes No
Dent and impact resistance High Medium Low Medium
Stable near windows and glass Yes Yes No Varies
Underfloor heating Yes Yes Yes Varies
Fitting Click, floating Click, floating Usually glued Click or glued
Noise underfoot Low, built in acoustic layer High without underlay Low Medium
Maintenance Sweep and mop Sweep and mop Sweep and mop Periodic refinishing

Where it works

Rooms that used to be a compromise.

SPC flooring in hallway

Kitchens

Spills, dropped pans and constant traffic.

Bathrooms and wet rooms

Standing water is not an issue.

Hallways and entrances

The busiest floor in the house.

Conservatories and sunrooms

No expansion, no lifting.

Open plan living

Quieter underfoot than laminate.

Rentals and holiday lets

Hard to damage, cheap to maintain.

SPC flooring on bathroom floor
SPC flooring on kitchen floor
SPC flooring on bedroom floor
SPC flooring on bathroom floor

The range

Four floors to choose from.

Every board in the range is stocked and available now. See the full range with sizes, pack coverage and pricing.

Clyde Haya Swatch Colour

Clyde Haya

Pale, even oak with a soft grain. Opens up smaller rooms and north-facing spaces.

KLHCH — herringbone
KLPCH — 1220 x 183mm plank

Clyde Haya setting
Severn Roble Colour Swatch

Severn Roble

Mid-tone oak with a warm brown cast. Works in plank or herringbone.

KLHSR — herringbone
KLPSR — 1220 x 183mm plank

Clyde Haya setting
Severn Fresno Colour Swatch

Severn Fresno

Warm light-mid ash effect with a fine, straight grain.

KLHSF — herringbone
KLPSF — 1220 x 183mm plank

Clyde Haya setting
Pirineos Colour Swatch

Pirineos

Rustic oak with knots and movement for a more characterful floor.

KLHP — herringbone
KLPP — 1220 x 183mm plank

Clyde Haya setting

Prefer to see it in person? Samples are available on request, or visit any of our five showrooms.

Trade and commercial

Specifying SPC for a project?

SPC suits offices, retail units, salons, surgeries and rental portfolios where the floor has to look right and survive years of traffic.

Stock held for volume orders. Trade pricing available. Technical data, subfloor guidance and samples supplied on request.

Fitter laying SPC flooring

Fitting

Down in a day.

SPC floats over most sound, level subfloors, including existing tiles. The click system means no adhesive and no long curing time. Leave the expansion gap around the perimeter, cover it with beading or skirting, and the room is back in use the same day.

Compatible with underfloor heating. Bring the heating up gradually once the floor is down.

Technical information

The spec.

75%

Mineral Core

21DB

Acoustic reduction

R10

Slip resistance

UFH

Heating compatible

Board thickness, herringbone 5.5mm Board thickness, 1220 x 183mm plank 5mm
Coverage per pack, herringbone 0.906m² per pack Coverage per pack, 1220 x 183mm plank 2.455m² per pack
Slip resistance rating R10 Acoustic rating Up to 21dB reduction
Underfloor heating Compatible Warranty Residential and commercial

Full technical data sheets are supplied on request for every board in the range.

FAQ

Questions we get asked.

Yes. The core is mineral based rather than wood based, so water does not swell or warp it. Standing water, spills and mopping are all fine.

Yes. SPC is one of the few click floors suitable for bathrooms and wet rooms.

Yes. Bring the heating up gradually after fitting.

Laminate has a wood based core, so water is its weak point. SPC is waterproof, denser and quieter. Laminate is usually cheaper.

Usually yes, provided the tiles are sound, level and firmly bonded. Grout lines may need filling first.

With normal domestic use, expect many years of service. Warranty details are in the technical section above.

No. The acoustic backing is bonded to the board.

Order a sample of SPC Flooring

Order up to 4 samples for free. Delivered within 48 hours.

Note: In most cases you will receive a full-size sample, but for some products this may differ.

Discuss your project

Talk it through with us.

Whether you’re refitting one room or specifying a full commercial floor, our team can talk you through sizes, subfloors and the right finish for the space.

Our website uses cookies. You can review the cookies we use and our privacy policy on this page.

Tile terminology glossary

  • Matt finish tile

    A tile with a non shiny surface which has very little reflection regardless of any lighting.

  • Satin finish tile

    A tile with a slight sheen to it offering a small amount of light reflection at certain angles.

  • Polished finish tile

    A tile which has been mechanically polished with a diamond wheel to give a very high shine. This is different to a glazed tile which also offers a reflection as this is achieved by coating the tile with a glaze on the surface.

  • Shade variation

    Shade variation is a difference in colour or texture from one tile to the next.

  • PTV (Pendulum Test Value)

    A slip resistance test generated by swinging a rubber footed pendulum over the surface of a floor or tile which in turn records the friction or slip resistance. A rating of 36+ is considered as anti-slip, where a value less than 36 are not considered suitable for anti-slip purposes.

  • Rectified tile

    A product that has been through an additional process where the tile is cut after the baking process to produce a clean edge on all sides – ideal for a minimal grout line.

Closing for Christmas

We will be closed over the Christmas period from the 21st December at 4pm, reopening on the 2nd January 2024.

See you in the new year!